OSCILLOSCOPE, 20MHz

This is a portable type of Oscilloscope for two traces. The band width is 0-20MHz. The instrument is of easy operation with comfortable controls. Its reasonable structure and technology makes it convenient to repair and calibrate.

  • Dual Trace Dual Channel Oscilloscope with Component Test Facility
  • Bandwidth : 20MHz
  • Full bandwidth sweeping circuit is used in the sweeping system
  • The flexible and convenient triggering mode has the functions for
    selecting signals from one channel or triggered by Ext signals
  • ALT trigger to observe signals from two irrelative channels
  • The instrument has the functions of TV-H / TV-V synchronization and
    trigger-lock to observe all kinds of signals stably
  • From the terminal for trigger input, CH1 and CH2 signals can be output along
    with the triggering channel to connect the Ext frequency counter
  • Y deflection operation : Y1, Y2, ALT, CHOP, ADD, mode X-Y
  • Vertical Deflection : 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
  • Rising time : < 18nS
  • Maximum Input Voltage : 400V (DC +Acp-p)
  • Triggering Source : Y1, Y2, ALT, POWER, EXT
  • Trigger Coupling : AC/DC (EXT), NORM/TV-H, TV-V
  • Horizontal Sweep Mode : AUTO, TRIG, LOCK, SINGLE
  • Sweep time factor : 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
  • Magnification : x10
  • X-Ymode input : X-Axis YI and Y-Axis Y2
  • Z Axis minimum input level : TTL Level
  • Component Test Facility
  • Calibration Signal : Square wave of 0.5V at 1kHz
  • CTR Display size : 8cm x 10cm
  • Auxiliary Power Supply : 230V 50Hz AC

Different Frequency Ranges also available.

SKU: PH 12640 Categories: ,

Description

This is a portable type of Oscilloscope for two traces. The band width is 0-20MHz. The instrument is of easy operation with comfortable controls. Its reasonable structure and technology makes it convenient to repair and calibrate.

  • Dual Trace Dual Channel Oscilloscope with Component Test Facility
  • Bandwidth : 20MHz
  • Full bandwidth sweeping circuit is used in the sweeping system
  • The flexible and convenient triggering mode has the functions for
    selecting signals from one channel or triggered by Ext signals
  • ALT trigger to observe signals from two irrelative channels
  • The instrument has the functions of TV-H / TV-V synchronization and
    trigger-lock to observe all kinds of signals stably
  • From the terminal for trigger input, CH1 and CH2 signals can be output along
    with the triggering channel to connect the Ext frequency counter
  • Y deflection operation : Y1, Y2, ALT, CHOP, ADD, mode X-Y
  • Vertical Deflection : 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
  • Rising time : < 18nS
  • Maximum Input Voltage : 400V (DC +Acp-p)
  • Triggering Source : Y1, Y2, ALT, POWER, EXT
  • Trigger Coupling : AC/DC (EXT), NORM/TV-H, TV-V
  • Horizontal Sweep Mode : AUTO, TRIG, LOCK, SINGLE
  • Sweep time factor : 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
  • Magnification : x10
  • X-Ymode input : X-Axis YI and Y-Axis Y2
  • Z Axis minimum input level : TTL Level
  • Component Test Facility
  • Calibration Signal : Square wave of 0.5V at 1kHz
  • CTR Display size : 8cm x 10cm
  • Auxiliary Power Supply : 230V 50Hz AC

Different Frequency Ranges also available.